• 7 anni di garanzia
  • Alta capacitĆ 
  • Motore da 1500 watt

Mincer

My mincer has gone black. Is it ruined?

We are sorry to hear that you washed your mincer in the dishwasher. Itā€™s not something we recommend. The mincer is oxidizing and turning black. We donā€™t have a solution to this, but it is worth trying the following:

  1. Wash off as much as you can of the black residue using hot water and washing-up liquid
  2. Then place it in a pan and cover it in boiling water
  3. Pour in one sachet of citric acid per litre of water
  4. Boil for 30-40 minutes
  5. Take it out and dry it carefully. Smear cooking oil all over it

We have stopped mincers turning black in this way. But it will never be as nice and shiny as it was before, after it had been steel ball polished. But hopefully it will be usable. Run something through other than expensive meat to start with, perhaps potatoes or onions instead, so that you can get rid of some of the black residue that probably remains inside the discs.

Wash off as much as you can of the black residue using hot water and washing-up liquid

Per saperne di piĆ¹

There is black liquid coming out of the mincer/strainer. What is it?

There is no oil in our machines. What is happening here is that the oxygen content in some apples reacts to the metal in the strainer valve and starts to oxidize. Itā€™s not at all harmful, but obviously it doesnā€™t look very nice. To prevent this, you can either sprinkle a little lemon juice over the apple segments, or if you are making a large quantity, switch everything off and rinse everything through once before continuing.

There is no oil in our machines. What is happening here is that the oxygen content in some apples reacts…

Per saperne di piĆ¹

Why does my apple sauce become discoloured?

What is happening here is that the oxygen content in some apples reacts to the metal in the strainer valve and starts to oxidize. Itā€™s not at all harmful, but obviously it doesnā€™t look very nice. To prevent this, you can either sprinkle a little lemon juice over the apple segments, or if you are making a large quantity, switch everything off and rinse everything through once before continuing.

What is happening here is that the oxygen content in some apples reacts to the metal in the strainer valve…

Per saperne di piĆ¹

The mincer isnā€™t mincing very well. What should I do?

Make sure that the knife is attached correctly. I.e. the blade of the knife must face outward, towards the disc. If you do a lot of mincing, the knife may need sharpening. Use a whetstone to do this. If the knife is very worn, it may be worth replacing it with a new knife. Sometimes, the piece of meat being minced may be the cause of the problem ā€“ it may contain a lot of sinews, perhaps.Ā  In such cases, begin with a coarser disc (8 mm), and then put the mince through increasingly finer discs. Finish off by mincing a bit of crust, a potato or a piece of onion, to clear the remaining meat from the mincer.

Make sure that the knife is attached correctly. I.e. the blade of the knife must face outward towards the disc…

Per saperne di piĆ¹

What do I need to consider when making my own sausage mix?

Freeze the mincer before use. Grease the sausage horn with a little sausage filling before you slide on the casing. If air gets into the sausage, stop the Assistent and press the air backwards through the air channel. Sausagemeat can be mixed using the Assistent; use the bowl, dough knife and dough roller.

Freeze the mincer before use. Grease the sausage horn with a little sausage filling before you slide on the casing…

Per saperne di piĆ¹

Loading